Wählen Sie Ihre Sprache:
Choose your language:
Welcome  KVM solutions  KVM extenders  VisionXS-IP-DP-UHR

NEW: VisionXS-IP-DP-UHR – extends 4K@60Hz over standard IP-based networks (1Gbit/s up to 10Gbit/s)

Small housing, great performance:
The VisionXS-IP-DP-UHR is a matrix-compatible extender and much smaller than previous IP extender variants. Thanks to the new concept, the devices require no active cooling. Instead, the housing is used to dissipate the heat (passive cooling). The space available (especially in the rack) can be optimally used thanks to the considerably lower space requirement and the appropriate mounting solutions.

In contrast to previous versions (DP1.2-Vision-IP, transmission with up to 1Gbit/s), the VisionXS-IP-DP-UHR uses standard networks with up to 10Gbit/s . This has the big advantage that it needs way less compression, thus providing a greatly improved user experience. Thanks to the bandwidth management, the new variants are of course also compatible with the predecessor variants with 1GBit technology.

Front view tube housing: VisionXS-IP-DP-UHR (changes reserved)
Rear view tube housing: VisionXS-IP-DP-UHR (changes reserved)

Mix & Match – 1:1 connection and matrix mode

Due to predefined IP addresses, console and computer modules can be used in a 1:1 connection via existing network infrastructures. Within the KVM-over-IP product family, the different extender variants are compatible with each other.

The KVM-over-IP extenders can be operated in matrix mode using an additional control unit, the ControlCenter-IP. This allows the distribution and sharing of signals within a LAN infrastructure.

Transmission over IP-based networks up to 10Gbit/s

VisionXS-IP-DP-UHR extenders use G&D’s KVM-over-IP technology to transmit signals. Signals are transmitted in compressed form over IP-based networks on layer 3 (1Gbit/s up to 10Gbit/s).

The extender transmits the following signals:

  • DisplayPort 1.2a
    Image data is processed in lossless video quality, pixel-perfect and with very good hand-eye coordination. The possible image resolution corresponds to a pixel rate of 25MPixel/s up to 600MPixel/s.
  • Keyboard/mouse (USB)
  • Embedded Audio
  • USB HID Generic
  • Audio analog (optional)
  • RS232 und RS422 (optional)

Bandwidth management for more flexibility

By means of manual bandwidth management, transmission can be flexibly adapted to a wide range of bandwidth requirements and the video settings actually required.

Integrated Transmission Redundancy (optional with feature key)

No additional hardware is required to use transmission redundancy. Instead, the devices (console and computer modules) are already prepared for this. The function can be activated, even later, via a software feature key. Additional redundancy modules (SFP transceiver fiber) are available for the fiber variants.

Security and configuration

Video, keyboard, mouse and control data is encrypted with AES-128. The devices include a network interface for transmitting data, WebIF, configuration, monitoring, SNMP and updates. They are also equipped with a management network interface that provides all of the above functions in addition to data transmission. The system can be configured by an on-screen display as well.

New and efficient mounting solutions – space saving and less screws

In conjunction with the appropriate mounting solutions, the existing space (especially in the rack) can be optimally used with VisionXS. In addition, with the new mounting solutions, mounting is much easier and faster. The new DeviceCarrier requires almost no screws, since it uses slide-in elements. The screws are used for locking.

Product details


  • Support of DisplayPort 1.2a video
  • Resolution with pixel rates between 25 MPixel/s and 600 MPixel/s
  • Horizontal frequency: 25 kHz - 295 kHz
  • Vertical frequency: 24 Hz - 240 Hz
  • Support of 4K and UltraHD resolutions @ 60 Hz
  • Pixel encoding of RGB 4:4:4 with 24bpp/8bpc
  • Compressed transmission, pixel perfect, lossless video quality, near-zero latency, ideal hand-eye coordination
  • E-EDID support
  • Support for DDC/CI protocol

Exemplary resolutioins:

  • 4096 × 2160 @ 60 Hz (4K @ 60 Hz)
  • 3840 × 2160 @ 60 Hz (Ultra-HD @ 60 Hz)
  • 2560 × 1600 @ 60 Hz
  • 2560 × 1440 @ 144 Hz
  • 2048 × 2048 @ 60 Hz (2K × 2K)
  • 1920 × 1200 @ 60 Hz
  • 1920 × 1080 @ 240 Hz

Further VESA and CEA standardized resolutions can be used within the scope of the pixel rate and the horizontal and vertical frequency.


  • Integrated matrix support for use in combination with ControlCenter-IP
  • On-screen display for configuration and operation (new: multilingual)
  • Web application Config Panel 21 for configuration, monitoring and updates (new: in more languages)
  • Screen-freeze function


  • Encrypted video, keyboard, mouse and control data (AES-128)
  • Support of USB keyboard/mouse
  • Permanent keyboard and mouse emulation
  • Permanent monitor emulation
  • Embedded audio on DisplayPort up to stereo PCM
  • Audio stereo analog (optional, unidirectional from the computer module to the console module)
  • Generic USB HID interface 


  • IP-based signal transmission over standard Ethernet networks Layer 3 (up to 10Gbit/s), CAT or optical fibers
  • HDIP level 1-3
  • Integrated Transmission Redundancy (optional with feature key)
  • Secure and trouble-free operation through pairing and encryption with AES-128 (cannot be manipulated)
  • Unlimited transmission distance, with up to 100 meters between two active network components when using CAT cabling and up to 10,000 metres when using optical fibres


  • Integrated Transmission Redundancy (optional with feature key)
  • Power supply via an optional external power supply unit, desktop versions (-DT) with internal power supply unit
  • Redundant, external power supply (only for desktop variants)
  • Tube and desktop versions available
    Dimensions tube variants:
    109 mm x 39,8 mm x 184 mm (W x H x D)
    Dimensions desktop variants:
    170 mm x 39,8 mm x 184 (W x H x D)
  • Mounting solutions (sets for tablemounting and DeviceCarriers) are separately available for all variants

System update

  • Update via Config Panel 21 (new: in more languages, HTML, Java-free, optimised operation)

Configuration and security

  • Encrypted video, keyboard, mouse and control data (AES-128)
  • Support of Quality of Service (QoS), can be configured by users
  • Users can configure network ports of the respective communication channels
  • Additional, independent management interface
  • Manual bandwidth management to adjust the required bandwidth
  • SNMP (trap and agent)
  • Galvanic separation of transmitter and receiver (only with fiber), less sensitive to interfering radiation
  • High reliability

Screen-freeze function

If the receiver loses the video signal due to a broken connection or a problem with the computer‘s graphics card, the Screen-freeze function „freezes“ the image last displayed on the monitor. This status is highlighted by a red semi-transparent frame. The function is automatically cancelled when the display receives an active video signal.


With the Monitoring function, you can auto-output device status messages to Syslog servers or via SNMP. The web interface lets you monitor the device manually.

The monitoring function of the VisionXS-IP-DP-UHR queries the following values:

•    Status power supply unit (on/off)
•    Status temperature threshold device (in/over limit)
•    Status connection cables (ok/nok)
•    Status computer (on/off)
•    Status image signal graphics card computer (available/not available)
•    Status network
•    Status SFP modules (fiber variant)
•    Status interfaces transmitter and receiver
•    Freeze status
•    Type of display
•    Proactive monitoring of device status
•    Event reporting function (syslog or SNMP traps)

List of Item Numbers

Item No.Description
Item No.Description
Item No.Description
A8200043Transm. Redundancy Option VisionXS/VisionXS-IP CAT
A8200049Transm. Redundancy Option VisionXS-IP-F(M) UHR 10G
A8200050Transm. Redundancy Option VisionXS-IP-F(S) UHR 10G


Data sheet

What is a KVM extender?

Please accept our marketing cookies to watch this video.


Transmission via CAT-X cable

Transmission via CAT-X cable

Transmission via fibre optics

Transmission via fibre optics

Resolutions up to 4K

Resolutions up to 4K

DisplayPort video signals

DisplayPort™ video signals

DVI-DualLink video signals

DVI-DualLink video signals

DVI-SingleLink video signals

DVI-SingleLink video signals

Analogue VGA video signals

Analogue VGA video signals

Mix & Match compatible

Mix & Match compatible

USB 2.0 transmission

USB 2.0 transmission

USB 3.0 transmission

USB 3.0 transmission

Transmission of audio signals

Transmission of audio signals

Transparent RS232

Transparent RS232


G&D product filter

To give you an overview of our broad product portfolio, we have designed the G&D product filter. You can also compare products directly with each other.

Use the G&D product filter

Register for our newsletter


Do you have any questions about our products? We are happy to advise you.

Contact form